 Public Domain Literature
"Performance Evaluation Of Zirconia Femoral
Heads"
Murray, M.G.S., Stuart, J.W. and Morrell, R.
Institute of Mechanical Engineers, "Engineers & Surgeons - Joined at the Hip", June 2002, London, UK
"Lubrication and Wear of Alumina-Alumina Hip
Bearings"
N.Y.Cheng, J.B. Medley, J.D. Bobyn , J.J. Krygier
Presented at 28th Leeds - Lyon Symposium on Tribology 2001
"Articular Bioceramics
- A Comparison of Japan and UK Practice"
Murray, M.G.S.
Overseas Mission to Japan - Mission Report. Edited by Bonfield, W., published
by the Institute of Materials, IOM Communications Ltd, Book 702, 1998.
"Healing and differentiation
of human osteoblasts on a titanium-zirconia composite material: the effect of
different brazing fillers"
Specchia, N., Pagnotta, A., Toesca, Sicking, R., Facchini, A. and Murray, M.
8th Congress of the European Orthopaedic Research Society, Barcelona, 1997.
"Evaluation of the
Effect of Stress Corrosion on Zirconia Femoral Heads"
Murray, M.G.S., Newman, M., Morrell, R., Byrne, W.P.
Bioceramics, Volume 9, Edited by Wilson, J., Hench, L. and Greenspan, D., Proceedings
of the 8th International Symposium on Ceramics in Medicine, Ponte Vedra, Florida,
November 1995.
"A Comparison of Zyranox®
zirconia Femoral heads before and 1½ years after implantation"
Murray, M.G.S, Pryce, A.W. and Stuart, J.W.
Fourth Euroceramics, Volume 8, Edited by Ravaglioli, A., pp37-44, October,1995.
"Fracture Stress-Mirror
Size Relations For Zirconia Femoral Heads"
Murray, M.G.S., Newman, M., Morrell, R., Byrne, W.P.
12th European Conference on Biomaterials, Porto, Portugal, 10-13 September,
1995.
"The suitability of
3 mol% yttria stabilised zirconia materials for use as long term implantation
devices"
Pryce, A.W. and Stuart, J.W.
6th Biomaterial Symposium, Ceramic Implant Materials In Orthopaedic Surgery,
Göttingen, Germany, September 21-23, 1994.
"Wear and Friction
Properties of Prosthetic Joint Materials Evaluated on a Reciprocating Pin-on-flat
apparatus"
Saikko, V. Wear, 166, 1993, 169-178.
"Mechanical Assessment
of Biograde Alumina"
Real, M.W., Cooper, D.R., Morrell, R., Rawlings, R.D., Weightman, B. and Davidge,
R.W., J. de Physique, Colloque, C1, 47, (1986), 763-767.
"The Microstructure
Dependance of Hardness in High Purity Alumina Ceramics"
D.J. Clinton, L.A. Lay and R. Morrell.
National Physical Laboratory, Teddington, UK.
"The Effect of the
Surface Finish of Alumina and Stainless Steel on the Wear rate of UHMW Polyethylene"
B. Weightman and D. Light
Imperial College of Science and Technology, London, UK
"The Laboratory Development
of a New Method of Attaching Ceramic Femoral Heads To Metal Stems"
R.A Wordsworth, B. Weightman,
Department of Mechanical Engineering, Imperial College, London, UK.
|
